R5#show run
Building configuration...

Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname R5
!
boot system flash c3620-d-mz_120-7_t.bin
enable password cisco
!
!
!
!
!
ip subnet-zero
ip cef
ip tcp path-mtu-discovery
!
ip multicast-routing
ip dvmrp route-limit 20000
frame-relay switching
!
!
!
interface Loopback0
 ip address 10.5.5.5 255.255.255.252
 no ip directed-broadcast
!
interface Loopback1
 ip address 20.20.20.20 255.255.255.0
 no ip directed-broadcast
!
interface Loopback2
 ip address 200.20.20.1 255.255.255.0
 no ip directed-broadcast
!
interface Ethernet0/0
 ip address 10.50.50.1 255.255.255.248
 ip helper-address 10.6.6.6
 no ip directed-broadcast
 ip nat inside
 ip pim sparse-dense-mode
 bridge-group 1
!         
interface TokenRing0/0
 no ip address
 no ip directed-broadcast
 shutdown
 ring-speed 16
!
interface Serial1/0
 no ip address
 no ip directed-broadcast
 encapsulation frame-relay
 no fair-queue
 clockrate 252000
 frame-relay intf-type dce
 frame-relay route 100 interface Serial1/2 101
 frame-relay route 102 interface Serial1/1 103
!
interface Serial1/1
 no ip address
 no ip directed-broadcast
 encapsulation frame-relay
 clockrate 252000
 frame-relay intf-type dce
 frame-relay route 103 interface Serial1/0 102
 frame-relay route 104 interface Serial1/2 110
!
interface Serial1/2
 no ip address
 no ip directed-broadcast
 encapsulation frame-relay
 no frame-relay inverse-arp
 frame-relay route 101 interface Serial1/0 100
 frame-relay route 110 interface Serial1/1 104
!
interface Serial1/3
 no ip address
 no ip directed-broadcast
 shutdown
!
router eigrp 10
 network 10.0.0.0
 no auto-summary
!
router bgp 1000
 bgp log-neighbor-changes
 network 20.20.20.0 mask 255.255.255.0
 network 200.20.20.0
 neighbor 10.6.6.6 remote-as 100
 neighbor 10.6.6.6 ebgp-multihop 5
 neighbor 10.6.6.6 update-source Loopback0
!
ip nat inside source list 100 interface Loopback0 overload
ip classless
no ip http server
!
!
map-list atm
access-list 100 deny   tcp host 10.50.50.1 eq 2065 host 10.8.8.8
access-list 100 deny   tcp host 10.50.50.1 eq 2067 host 10.8.8.8
access-list 100 deny   tcp host 10.50.50.1 host 10.8.8.8 eq 2065
access-list 100 deny   tcp host 10.50.50.1 host 10.8.8.8 eq 2067
access-list 100 permit ip 10.50.50.0 0.0.0.255 any
access-list 200 permit 0x0000 0x0D0D
bridge 1 protocol ieee
!
line con 0
 exec-timeout 0 0
 password cisco
 login
 transport input none
line aux 0
line vty 0 4
 exec-timeout 0 0
 password cisco
 login
!
end